Solo A50 S4 Pro R V.2

Wall ventilator with heat and energy recovery. Air flow: up to 50 m³/h

FEATURES
Wall ventilator with heat and energy recovery.
Supply clean fresh air to the premises.
Control via remote control.
Remove stale extract air from the premise.
Clean the air of dust and insects.
Prevent penetration of excessive humidity and appearance of mould.

Protect against outdoor noise.
Heat return and ensuring the balance of humidity in the room thanks to the built-in humidity sensor.
Reduce the heating costs in winter and air conditioning costs in summer.
Low energy demand.

DESIGN

FAN ENERGY HEAT EXCHANGER
Air is supplied or extracted by a reversible axial fan with EC motor.
Due to EC technology the fan is distinguished with low energy demand.
The motor has overheating protection and ball bearings for longer service life.

The high-technology ceramic energy heat exchanger with recovery efficiency up to 85 % is used for extract air heat energy recovery and supply air heating.

AIR FILTERS HUMIDITY SENSOR
Two built-in filters with total filter class G3 are used to clean supply and extract air flows.
The filters ensure fresh air cleaning of dust and insects and prevent the ventilator parts from soiling.
The filters are cleaned either with a vacuum cleaner or flushed with water.

Helps control the level of humidity in the room.
When the sensor is activated, if the humidity in the room exceeds the set level, the ventilator switches to the second (higher) speed.
The humidity sensor threshold can be adjusted by turning the potentiometer knob with a special plastic screwdriver.
The humidity sensor can be switched on and off using the remote control.